Webro – Cables

The embedded light engine draws its power from the source and display device while copper cables are used for the EDID, HDCP and ARC audio. This results in the best possible picture performance and fast syncing times.

Available in 7 / 9 / 12 / 15 / 20 and 30m lengths
Superior to all copper cable HDMI transmission systems
Individually tested in the UK for full compliance with all HDMI signal
Immunity to Radio Frequency and Electromagnetic Interference
Lighter than conventional copper cables
More resilient, flexible and thinner at only 4.8mm
Guaranteed to support full HDMI 2.0 features 3840×2160, HDR. 2020,
8/10/12/16bit, RGB, YCbCr 4:2:0/4:2:2/4:4:4, 24Hz-60Hz

Please ensure when installing:

The cables are installed the correct way around by following the diagram.

Fibre optic cables have a bend radius of no less than 6cm/2.4in. Please keep this in mind when installing the cables in wall and around objects

The cables have a max pull tension of 15Kg/33lbs. Care must be taken when feeding and pulling cables within walls.

Power off all equipment before connecting Fibre Optic HDMI Cable.