JVC Home Cinema Projectors

Low Profile JVC Bracket

The new low profile ultra slim projector bracket is designed to sit 25mm from the ceiling.

Its designed to fit the new range of JVC projectors (DLA-N5 / N7 and NX9)

Once installed you can fine tune the horizontal and vertical using the thumb screws

Easy Installation

  1. Remove the four feet from the base of the projector
  2. Screw in the mounting bolts all the way using the hex head. Make sure the washer is in place. DO NOT OVER TIGHTEN 
  3. Leave thumb screw at the top of the mounting bolt
  4. Tighten nut against washer to secure mounting bolt
  5. Fix the bracket to the ceiling with the security latches at the front
  6. Slide the projector on to the ceiling bracket. Immediately close the security latches and check the projector is mounted correctly.
  7. Turn thumb screws to adjust horizontal and vertical tilt
Low profile bracket to fit JVC N5/N7/NX9
Scroll to Top